// How to use DS1302-library to make a quick
// clock using a DS1302 and a I2C OLED.
// How to connect the DS1302 and OLED.
// DS1302: CE pin -> Arduino Digital 2 :also called rst
// I/O pin -> Arduino Digital 3 :also called dat
// SCLK pin -> Arduino Digital 4 :also called clk
// GND pin -> Arduino GND
// OLED: SCL pin -> Arduino SCL
// SDA pin -> Arduino SDA
// VCC pin -> Arduino 5V
// GND pin -> Arduino GND
#include <LiquidCrystal.h>
#include <DS1302.h>
#include "U8glib.h"
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
// Init the DS1302
DS1302 rtc(2, 3, 4);
void setup()
{
// Set the clock to run-mode, and disable the write protection
rtc.halt(false);
rtc.writeProtect(false);
// assign default color value
if ( u8g.getMode() == U8G_MODE_R3G3B2 ) {
u8g.setColorIndex(255); // white
}
else if ( u8g.getMode() == U8G_MODE_GRAY2BIT ) {
u8g.setColorIndex(3); // max intensity
}
else if ( u8g.getMode() == U8G_MODE_BW ) {
u8g.setColorIndex(1); // pixel on
}
else if ( u8g.getMode() == U8G_MODE_HICOLOR ) {
u8g.setHiColorByRGB(255,255,255);
}
// The following lines are initially needed to set the time but should be commented out
// and reuploaded to use the values already stored in the DS1302
//rtc.setDOW(SUNDAY); // Set Day-of-Week to FRIDAY
//rtc.setTime(15, 39, 0); // Set the time to 12:00:00 (24hr format)
//rtc.setDate(28, 12, 2014); // Set the date to August 6th, 2010
}
void loop()
{
u8g.firstPage();
do {
draw();
} while( u8g.nextPage() );
// rebuild the picture after some delay
delay(50);
}
void draw(void) {
u8g.setFont(u8g_font_courB14r); //change the font see notes
u8g.setFontPosTop(); //reference position for a text
u8g.drawStr( 0, 0, rtc.getTimeStr());//changing the two numbers adjusts the position of the words
u8g.drawStr( 0, 22, rtc.getDOWStr());
u8g.drawStr( 0, 44,rtc.getDateStr());
}
Can you contact me at nekloth(at)zgur(dot)net ? I bought the same OLED breakout, but I am not able to make it work, and I'd like to exchange with you.
ReplyDeleteThank you in advance !
Nekloth
Hi, but my problem only copy yours code. arduino ide is rtc.getTimeStr, rtc.getDOWStr, getDateStr(), is error not writting sorry bad writing english...
ReplyDeleteThank you